Tag Archives: pool

Steps To The Pool Water In Good Condition

The heat has arrived and with it the desire and need to -of those who are not lucky enough to live by the framework of going to the pool. It is estimated that there are a million pools in Australia, of which 6% are communal. The pool has been more or less abandoned for the rest of the year and now it’s put up. It is not just that the water looks clean, but it is and tailored to our needs. Here pool inspections in Brisbane company experts doing great work for pool inspection.

PH adjustment: The first step to get clean, clear and skin friendly water is to regulate the pH thereof. The correct value should be between 7.2 and 7.6 to ensure that the other measures applied function effectively. Tablets chlorine, salt electrolysis and active oxygen used to disinfect water If the pH of the water is too high, bathers may suffer irritation of the skin and eyes, the effect of disinfectants decrease, lime scale is formed and not muddy the waters. Conversely, if the value of the pH is too low will increase the risk of corrosion, there will be a deterioration of the glass, and irritation of eyes and skin can also occur.

Disinfection of water: Water from our pool can become the ideal means of life for a variety of microorganisms. The important thing is to maintain the free chlorine residual between 0.5-1.0 ppm in the water to be disinfected and have disinfectant power. In this way, we will avoid the cloudy water and algae appear.

To maintain continuous disinfection process throughout the bathing season there are several methods are chlorine tablets, apparatus or active oxygen salt electrolysis. In case of encountering any problems turbidity or algae, always take a shock treatment with granular dichloride and add liquid flocculant, in order to recover good water status. After applying the product, it is important to filter for a few hours, possibly brush the walls and floor of the pool , and wait 12-24 hours to precipitate the impurities, and by bringing all the precipitate cleaner directly to the drain without passing through the filter. It is also important to remember that the addition of chemicals should always be performed in the absence of bathers.

An algaecide regularly will prevent the appearance of algae prevention If you do not want algae run free in our pool, it is advisable to apply a algaecide regularly. Algae are an element ideal for growing fungi and bacteria. In addition, solar radiation and heat of summer own favor its appearance. The addition of algaecide must be accompanied by the presence of disinfectant, such as chlorine or bromine in the water to get a synergistic effect of both products and increase efficiency the algaecide. Crystal clear water in pool turbidity may appear.

The causes are problems of high pH, poor filtration, counter-washes ineffective filters and algae growth, manifested in many cases by the presence of tiny particles suspended in the water. Adding a flocculant causes larger particles, so that the filter can hold, and thus clarified water, also removing the oxidized metal ions filter alone it is unable to retain. Care filter Good care the pool filter will allow us to apply the chemical treatment more effective. A dirty filter, water quality worsens and increases consumption of chemicals. In addition, germs then spread by water multiply. To keep clean the filter backwash and we have to do to clean and disinfect the sand once a year before the start of the bathing season.